File: //proc/2/cwd/installd/perl588installer/CPAN-1.9301/Makefile.PL
#!/usr/bin/perl -w -*- mode: cperl -*-
use strict;
use vars qw( $VERSION @ST_PREFS );
BEGIN {$CPAN::Config_loaded=1}
BEGIN {$CPAN::Config_loaded=1} # keep old perls with -w quiet
use ExtUtils::MakeMaker qw(:DEFAULT);
use File::Path;
eval { require File::Spec; };
my $HAVE_FILE_SPEC = !$@;
eval { require YAML::Syck; };
my $HAVE_YAML_SYCK = !$@;
use File::Basename qw(basename);
require Config;
my $HAVE_MAKE = basename($Config::Config{make}) eq "make"; # file-scoped!
@ST_PREFS = qw(
);
my $Id = q$Id: Makefile.PL 146 2005-08-09 04:25:21Z k $;
$VERSION = sprintf "%.3f", 1 + substr(q$Rev: 146 $,4)/1000;
my $version_diff = 0; # we'll have to die if this becomes true
my $version_from;
{
local $^W;
$ExtUtils::MakeMaker::VERSION = eval $ExtUtils::MakeMaker::VERSION;
}
$main::SVN_RELEASE = 0;
if (-d ".svn") {
$main::SVN_RELEASE = 1;
} elsif ($ARGV[0] && $ARGV[0] =~ /setversion/) {
warn "!!!making release without .svn??? Take care!!!";
@ARGV = ();
sleep 2;
}
if ($HAVE_FILE_SPEC) {
$version_from = File::Spec->catfile(qw(lib CPAN.pm));
my $version_set_manually = 1; # not by SVN
if ($ARGV[0] && $ARGV[0] eq "--setversion") {
die "Your perl is a bit dated[$]].\nDo not make a release with it\n" if $] < 5.008;
die "Your MakeMaker is a bit dated[$ExtUtils::MakeMaker::VERSION].\nDo not make a release with it\n"
if $ExtUtils::MakeMaker::VERSION < 6.4502;
die "Your MakeMaker doesn't do the sign woodoo" unless
MM->can("signature_target");
shift @ARGV;
my $st;
local $ENV{LANG} = "C";
open $st, "svn st -u|" or die;
my $dirty = 0;
while (<$st>) {
next if /^\?/;
next if /^Head revision:/;
next if /^Status against revision:/;
print;
$dirty++;
}
close $st;
die "Not everything checked in or out?" if $dirty;
# $re parses the upper boundary of the output of svnversion
my $re;
eval q{ $re = qr/(?:\d+:)?(\d+)[SM]*$/; };
die $@ if $@; # old perl
my($sv_dot) = `svnversion .` =~ $re;
my($sv_from) = `svn st -u -v $version_from` =~ /^.{8}\s*(?:\d+)\s*(\d+)/;
die "Could not determine sv_from or sv_dot"
unless $sv_from > 0 && $sv_dot > 0;
if ($version_set_manually) {
# we must control that the VERSION in CPAN.pm is the same as in the Makefile
unshift @INC, "lib";
require $version_from;
open my $fh, "make the-release-name|" or die;
my $have_version;
while (<$fh>) {
next unless /^version\s+([\d\._]+)/;
$have_version = eval $1;
}
die "could not determine current version from Makefile" unless $have_version;
eval q{
no warnings "numeric";
if ($CPAN::VERSION != $have_version) {
warn "Not equal: CPAN::VERSION[$CPAN::VERSION] Makefile version[$have_version]";
$version_diff = 1;
}
};
die $@ if $@;
} else {
if ($sv_dot > $sv_from) {
warn "setting some property to make a checkin of this file possible";
0==system(svn => "propset",
"cpan:release",
"after_$sv_dot",
$version_from) or die;
warn "checking in to get the version up to the bleading edge";
0==system(svn => "ci",
"-m",
"Property set for release after_$sv_dot",
$version_from) or die;
# will have to die after Makefile is rewritten:
$version_diff = 1;
}
}
exit unless $version_diff;
}
}
# for 5.004_05 I installed all of them manually despite errors;
# version hints as of 2006-02
my $prereq_pm = {
'File::Spec' => 0, # KWILLIAMS; requires
# Scalar::Util;
# PathTools-3.16.tar.gz
'File::Temp' => 0, # TJENNESS; requires Test::More;
'Scalar::Util' => 0, # GBARR;
# Scalar-List-Utils-1.18.tar.gz;
'Test::Harness' => 2.62,
'Test::More' => 0, # MSCHWERN;
# Test-Simple-0.62.tar.gz;
};
if ($^O eq "darwin") {
$prereq_pm->{'File::HomeDir'} = 0.69;
}
if ($HAVE_FILE_SPEC) {
# import PAUSE public key to user's keychain
require Config;
my $dir;
for $dir (split /$Config::Config{path_sep}/, $ENV{PATH}) {
my $abs = File::Spec->catfile($dir, 'gpg');
my $cmd;
if ($cmd = MM->maybe_command($abs)) {
print "Importing PAUSE public key into your GnuPG keychain... ";
system($cmd, '--quiet', '--import', <PAUSE*.pub>);
print "done!\n";
print "(You may wish to trust it locally with 'gpg --lsign-key 450F89EC')\n";
last;
}
}
}
my @sign = (MM->can("signature_target") ? (SIGN => 1) : ());
# warn "sign[@sign]";
WriteMakefile(
INSTALLDIRS => 'perl', # as it is coming with perl
NAME => 'CPAN',
VERSION_FROM => $version_from,
EXE_FILES => [qw(scripts/cpan)],
PREREQ_PM => $prereq_pm,
($ExtUtils::MakeMaker::VERSION >= 6.3002 ?
(LICENSE => "perl") : (),
),
clean => {
FILES => "lib/CPAN/Config.pm t/dot-cpan/FTPstats.yml",
},
@sign,
($] >= 5.005 ?
(
ABSTRACT_FROM => 'lib/CPAN.pm', # retrieve abstract from module
AUTHOR => 'Andreas Koenig <andreas.koenig.gmwojprw@franz.ak.mind.de>') : (),
),
dist => {
DIST_DEFAULT => join(" ", # note: order matters!
"verify-no-subdir",
"verify-changes-date",
"verify-changes-version",
"kwalify-distroprefs",
"dd-prefs",
"Makefile",
"no_CR",
"META.yml",
"setversion",
"README",
"testdistros",
"all",
"chlog",
"tardist",
),
COMPRESS => 'gzip -9',
},
# I took it from RT-CPAN ticket 30098:
($ExtUtils::MakeMaker::VERSION >= 6.4502 ?
(META_ADD => {
repository => "https://pause.perl.org:5460/svn/cpanpm/trunk",
}) : ()),
);
if ($version_diff){
die "
==> I had to update some \$VERSIONs <==
==> Your Makefile has been rebuilt. <==
==> Please rerun the make command. <==
";
}
package MY;
sub macro {
q{
LC_ALL_noexport=en_GB.utf8
ALL_PERLS = /usr/bin/perl \
/usr/local/bin/perl \
/usr/local/perl-5.004_05/bin/perl \
/usr/local/perl-5.005_04/bin/perl \
/usr/local/perl-5.6.2/bin/perl \
/usr/local/perl-5.8.0/bin/perl \
/usr/local/perl-5.8.4/bin/perl \
# not sorted because order matters
MEGA_BASE = \
Bundle::CPANxxl \
CPAN::DistnameInfo \
DBD::SQLite \
Test::Simple \
/home/src/perl/tk/SVN/. \
/home/src/graphics/magick/ImageMagick-6.3.5/PerlMagick/. \
# define a random one
MEGA_XML=logs/megainstall.20070412T1450.d/RJRAY!RPC-XML-0.59.xml
YAML_MODULE=YAML::Syck
}
}
sub postamble {
return "" unless $HAVE_MAKE; # dmake has unknown issues with my Makefile
my @m;
push @m, q{
.SUFFIXES: .rnc .rng
.rnc.rng:
trang -I rnc -O rng $*.rnc $*.rng
svn-update:
svn up
update: svn-update dd-prefs
mega-validate: bin/colorout-to-dir.rng
xmllint -relaxng bin/colorout-to-dir.rng -noout $(MEGA_XML)
# the subdirs on MY OWN BOX are allowed here (only used for make dist!)
OKDIRS=CPAN|DIST|bin|blib|cover_db|\
distroprefs|eg|inc|lib|logs|patches|perlbug|\
protocols|related|release-lib|scripts|t|talks
verify-no-subdir:
@$(PERL) -e 'my$$s=join",",grep{!/^($(OKDIRS))\z/x&&-d($$_)}glob"*";' \
-e 'die"unexpected dir:$$s"if$$s'
verify-changes-date:
@$(PERL) -ne 'BEGIN{my@t=(localtime)[5,4,3];$$t[0]+=1900;$$t[1]++;$$t=sprintf"%04d-%02d-%02d",@t}' \
-e '$$ok++,exit if /^$$t\s/; END{die "Alert: did not find <$$t> in Changes file" unless $$ok}' Changes
verify-changes-version:
@$(PERL) -ne '$$ok++,exit if /\b$(VERSION)\b/; END{die "Alert: did not find <$(VERSION)> in Changes file" unless $$ok}' Changes
kwalify-distroprefs:
`echo $(PERL) | sed -e 's/perl$$/slaymake/'` validate
setversion:
$(PERL) Makefile.PL --setversion
README: lib/CPAN.pm Makefile
-[ -r $@ ] && chmod +w $@
-$(PERL) -MPod::Text -e 'Pod::Text->new->parse_from_file(\*ARGV)' lib/CPAN.pm > $@
# http://ch.tudelft.nl/~arthur/svn2cl/
chlog-trad : ChangeLogTrad.svn
ChangeLogTrad.svn : Makefile lib/CPAN.pm MANIFEST
-/home/src/devel/svn/svn2cl/svn2cl-current/svn2cl.sh --strip-prefix trunk --group-by-day --stdout -r HEAD:2000 https://pause.perl.org:5460/svn/cpanpm/trunk > $@
# for debugging
chlog-xml :
svn log --xml --verbose > ChangeLog.xml
the-release-name :
$(NOECHO) $(ECHO) 'version ' $(VERSION)
$(NOECHO) $(ECHO) 'release-name ' $(DISTVNAME).tar$(SUFFIX)
release ::
/usr/bin/perl -Irelease-lib -S release $(DISTVNAME).tar$(SUFFIX)
rm -rf $(DISTVNAME)
svn cp -m 'This is $(VERSION)' https://pause.perl.org:5460/svn/cpanpm/trunk https://pause.perl.org:5460/svn/cpanpm/tags/$(VERSION)
checkout ::
svn co https://pause.perl.org:5460/svn/cpanpm/trunk ./
# 16=Distribution; 1024=Shell; 32768=Queue
# $$CPAN::DEBUG|=16;$$CPAN::DEBUG|=1024;$$CPAN::DEBUG|=32768;
megainstall: logs/.exists
for DATE in `date +%Y%m%dT%H%M`; do \
nohup $(PERL) -Ilib -MCPAN -e 'install(qw(Term::ReadKey))' < /dev/null > logs/megainstall.$$DATE.out 2>&1; \
LANG=en_US.utf8 $(PERL) -Ilib -MCPAN -MPOSIX -e 'sub intime {POSIX::strftime("%FT%T",localtime()) lt "2008-09-30T23:59:59"}; \
CPAN::HandleConfig->load; \
open FH, "megainstall.txt" or die; chomp(@MEGA = grep {!/^#/} <FH>); \
install(grep {!m[/]||-e$$_} qw($(MEGA_BASE))); \
install("ANDK/CPAN-1.92_65.tar.gz"); \
install("MSCHWERN/Test-Simple-0.81_02.tar.gz") if intime(); \
CPAN::Shell->reload("cpan"); \
install(map {$$_->[0]} sort {$$a->[1]<=>$$b->[1]} map {[$$_,rand(1)]} @MEGA); \
CPAN::Shell->failed' >> logs/megainstall.$$DATE.out 2>&1; \
$(PERL) bin/colorout-to-dir-2.pl logs/megainstall.$$DATE.out; \
`pwd`/bin/dir-to-jifty.pl logs; \
done
# 16=Distribution; 32=Bundle; 32768=Queue
depefails:
$(PERL) -Ilib -MCPAN -e 'CPAN::HandleConfig->load;$$CPAN::DEBUG|=16;$$CPAN::DEBUG|=32;$$CPAN::DEBUG|=32768;install(qw(CPAN::Test::Dummy::Perl5::Build::DepeFails));'
logs/.exists :
mkdir -p logs
touch $@
run :
$(PERL) -Ilib -MCPAN -eshell
run_testenv_db :
$(PERL) -Ilib -It -MCPAN::MyConfig -MCPAN -deshell
record-session :
$(PERL) -Ilib -MCPAN -e '$$CPAN::Suppress_readline=$$CPAN::Echo_readline=1;shell' | tee ttt.out
run-with-sqlite :
$(PERL) -I$$HOME/.cpan -Ilib -MCPAN::SQLite -MCPAN::MyConfig -MCPAN -e '$$CPAN::Config->{use_sqlite}++; $$CPAN::Config->{sqlite_dbname}="cpandb-sqlite"; shell'
testrun_very_offline : rm_mirrored_by run_emu_offline
testrun_emu_offline :
$(PERL) -I$$HOME/.cpan -Ilib -MCPAN::MyConfig -MCPAN -e '@CPAN::Defaultsites = qw(file:///dev/null); $$CPAN::Config->{urllist} = []; shell'
rm_mirrored_by :
rm -f $$HOME/.cpan/sources/MIRRORED.BY*
testrun_http_only :
$(PERL) -I$$HOME/.cpan -Ilib -MCPAN::MyConfig -MCPAN -e '$$CPAN::Config->{urllist} = [qw(http://www.planet-elektronik.de/CPAN/)]; shell'
urllist :
$(PERL) -Ilib -MCPAN -MCPAN::FirstTime -e 'CPAN::FirstTime::init("$$ENV{HOME}/.cpan/CPAN/MyConfig", args => [qw(urllist)])'
runadmin :
$(PERL) -Ilib -MCPAN::Admin -eshell
rundb :
$(PERL) -Ilib -MCPAN -deshell
sign:
cpansign -s
show-batch-signing-keys:
for f in PAUSE*.pub; do echo "++++$$f++++"; gpg --verbose --with-colons $$f; done
show-imported:
gpg --list-sigs --with-colons 450F89EC
# seems to need at least gnupg 1.4.2:
upload-batch-signing-key:
gpg --send-key 450F89EC
diff::
svn diff | less
howto-release:
@$(ECHO) make ci dist \&\& make release
META.yml: metafile
$(CP) $(DISTVNAME)/META.yml ./META.yml
install-devel-cover-unless-uptodate:
$(PERL) -Ilib -MCPAN -e 'CPAN::Shell->install("/home/src/perl/devel-cover/SVN/.") unless CPAN::Shell->expand("Module","Devel::Cover")->uptodate'
install-devel-cover-unconditionally:
$(PERL) -Ilib -MCPAN -e 'CPAN::Shell->install("/home/src/perl/devel-cover/SVN/.")'
testcover: testdistros install-devel-cover-unless-uptodate
:>SIGNATURE
$(PERL) -MDevel::Cover -e 0
`dirname $(PERL)`/cover -delete
HARNESS_PERL_SWITCHES=-MDevel::Cover $(MAKE) test
`dirname $(PERL)`/cover
man:
$(PERL)doc -F lib/CPAN.pm
testdistros: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-1.03.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-DepeFails-1.02.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-Fails-1.03.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-BuildOrMake-1.02.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-1.05.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeOne-1.00.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeTwo-1.00.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeThree-1.00.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-ConfReq-1.00.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Expect-1.00.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Failearly-1.02.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/cpantestdummies/CPAN-Test-Dummy-Perl5-Make-Features-1.04.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-UnsatPrereq-1.00.tar.gz \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Zip-1.03.zip \
t/CPAN/authors/id/A/AN/ANDK/NotInChecksums-0.000.tar.gz
# sorry, unix centric (and only makes sense on a working copy of the
# repository; else 'make test TEST_FILES=t/30shell.t TEST_VERBOSE=1'
# will do)
testshell-with-protocol: testdistros
$(PERL) -e 'for ("protocols"){-d $$_ or mkdir $$_, 0755}'
$(MAKE) test TEST_FILES=t/30shell.t TEST_VERBOSE=1 PERL='$(PERL)' | \
tee protocols/make-test-`date +%Y%m%dT%H%M%S`
ls -lt protocols | head
testshell-with-protocol-without-expect: testdistros
$(PERL) -e 'for ("protocols"){-d $$_ or mkdir $$_, 0755}'
CPAN_RUN_SHELL_TEST_WITHOUT_EXPECT=1 $(MAKE) test \
TEST_FILES=t/30shell.t TEST_VERBOSE=1 | \
tee protocols/make-test-`date +%Y%m%dT%H%M%S`
ls -lt protocols | head
testshell-with-protocol-twice: testdistros
$(PERL) -e 'for ("protocols"){-d $$_ or mkdir $$_, 0755}'
$(PERL) -p -i~ -e 's/colorize_output\D+\d/colorize_output=>0/' t/CPAN/TestConfig.pm
$(MAKE) test TEST_FILES=t/30shell.t TEST_VERBOSE=1 | \
tee protocols/make-test-`date +%Y%m%dT%H%M%S`
$(PERL) -p -i~ -e 's/colorize_output\D+\d/colorize_output=>1/' t/CPAN/TestConfig.pm
$(MAKE) test TEST_FILES=t/30shell.t TEST_VERBOSE=1 | \
tee protocols/make-test-`date +%Y%m%dT%H%M%S`
$(PERL) -p -i~ -e 's/colorize_output\D+\d/colorize_output=>0/' t/CPAN/TestConfig.pm
ls -ltr protocols | tail
#
# testdistros
#
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-1.03.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build/Changes \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build/Build.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build/lib/CPAN/Test/Dummy/Perl5/Build.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build && \
$(PERL) Build.PL && \
./Build dist && \
mv CPAN-Test-Dummy-Perl5-Build-1.03.tar.gz .. && \
./Build clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-DepeFails-1.02.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-DepeFails/Changes \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-DepeFails/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-DepeFails/README \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-DepeFails/Build.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-DepeFails/lib/CPAN/Test/Dummy/Perl5/Build/DepeFails.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-DepeFails/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-DepeFails && \
$(PERL) Build.PL && \
./Build dist && \
mv CPAN-Test-Dummy-Perl5-Build-DepeFails-1.02.tar.gz .. && \
./Build clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-Fails-1.03.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-Fails/Changes \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-Fails/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-Fails/README \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-Fails/Build.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-Fails/lib/CPAN/Test/Dummy/Perl5/Build/Fails.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-Fails/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-Fails && \
$(PERL) Build.PL && \
./Build dist && \
mv CPAN-Test-Dummy-Perl5-Build-Fails-1.03.tar.gz .. && \
./Build clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-BuildOrMake-1.02.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-BuildOrMake/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-BuildOrMake/Build.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-BuildOrMake/Makefile.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-BuildOrMake/lib/CPAN/Test/Dummy/Perl5/BuildOrMake.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-BuildOrMake/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-BuildOrMake && \
$(PERL) Build.PL && \
./Build dist && \
mv CPAN-Test-Dummy-Perl5-BuildOrMake-1.02.tar.gz .. && \
./Build clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-1.05.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make/Changes \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make/Makefile.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make/lib/Bundle/CpanTestDummies.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make/lib/CPAN/Test/Dummy/Perl5/Make.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make && \
$(PERL) Makefile.PL && \
$(MAKE) dist && \
mv CPAN-Test-Dummy-Perl5-Make-1.05.tar.gz .. && \
$(MAKE) clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeOne-1.00.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeOne/Changes \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeOne/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeOne/Makefile.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeOne/lib/CPAN/Test/Dummy/Perl5/Make/CircDepeOne.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeOne/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeOne && \
$(PERL) Makefile.PL && \
$(MAKE) dist && \
mv CPAN-Test-Dummy-Perl5-Make-CircDepeOne-1.00.tar.gz .. && \
$(MAKE) clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeTwo-1.00.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeTwo/Changes \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeTwo/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeTwo/Makefile.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeTwo/lib/CPAN/Test/Dummy/Perl5/Make/CircDepeTwo.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeTwo/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeTwo && \
$(PERL) Makefile.PL && \
$(MAKE) dist && \
mv CPAN-Test-Dummy-Perl5-Make-CircDepeTwo-1.00.tar.gz .. && \
$(MAKE) clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeThree-1.00.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeThree/Changes \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeThree/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeThree/Makefile.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeThree/lib/CPAN/Test/Dummy/Perl5/Make/CircDepeThree.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeThree/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-CircDepeThree && \
$(PERL) Makefile.PL && \
$(MAKE) dist && \
mv CPAN-Test-Dummy-Perl5-Make-CircDepeThree-1.00.tar.gz .. && \
$(MAKE) clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-ConfReq-1.00.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-ConfReq/Changes \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-ConfReq/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-ConfReq/mymeta.yml \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-ConfReq/Makefile.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-ConfReq/lib/CPAN/Test/Dummy/Perl5/Make/ConfReq.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-ConfReq/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-ConfReq && \
$(PERL) Makefile.PL open_the_backdoor && \
$(MAKE) dist && \
mv CPAN-Test-Dummy-Perl5-Make-ConfReq-1.00.tar.gz .. && \
$(MAKE) clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/cpantestdummies/CPAN-Test-Dummy-Perl5-Make-Features-1.04.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Features/Changes \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Features/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Features/mymeta.yml \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Features/Makefile.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Features/lib/CPAN/Test/Dummy/Perl5/Make/Features.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Features/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Features && \
$(PERL) Makefile.PL open_the_backdoor && \
$(MAKE) dist && \
mv CPAN-Test-Dummy-Perl5-Make-Features-1.04.tar.gz ../cpantestdummies/ && \
$(MAKE) clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Expect-1.00.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Expect/Changes \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Expect/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Expect/Makefile.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Expect/lib/CPAN/Test/Dummy/Perl5/Make/Expect.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Expect/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Expect && \
$(PERL) Makefile.PL && \
$(MAKE) dist && \
mv CPAN-Test-Dummy-Perl5-Make-Expect-1.00.tar.gz .. && \
$(MAKE) clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Failearly-1.02.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Failearly/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Failearly/Makefile.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Failearly/lib/CPAN/Test/Dummy/Perl5/Make/Failearly.pm
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Failearly && \
$(PERL) Makefile.PL && \
$(MAKE) dist && \
mv CPAN-Test-Dummy-Perl5-Make-Failearly-1.02.tar.gz .. && \
$(MAKE) clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-UnsatPrereq-1.00.tar.gz: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-UnsatPrereq/Changes \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-UnsatPrereq/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-UnsatPrereq/Makefile.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-UnsatPrereq/README \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-UnsatPrereq/lib/CPAN/Test/Dummy/Perl5/Make/UnsatPrereq.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-UnsatPrereq/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-UnsatPrereq/ && \
$(PERL) Makefile.PL && \
$(MAKE) dist && \
mv CPAN-Test-Dummy-Perl5-Make-UnsatPrereq-1.00.tar.gz .. && \
$(MAKE) clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Zip-1.03.zip: \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Zip/MANIFEST \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Zip/Makefile.PL \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Zip/lib/CPAN/Test/Dummy/Perl5/Make/Zip.pm \
t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Zip/t/00_load.t
cd t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Zip && \
$(PERL) Makefile.PL && \
$(MAKE) dist && \
mv CPAN-Test-Dummy-Perl5-Make-Zip-1.03.zip .. && \
$(MAKE) clean
ls -l $@
t/CPAN/authors/id/A/AN/ANDK/NotInChecksums-0.000.tar.gz :
echo " ----No content---- " > t/CPAN/authors/id/A/AN/ANDK/tempfile
cd t/CPAN/authors/id/A/AN/ANDK && tar cvzf NotInChecksums-0.000.tar.gz tempfile
$(RM) t/CPAN/authors/id/A/AN/ANDK/tempfile
ls -l $@
#
#
#
testallperls :
:>SIGNATURE
for p in $(ALL_PERLS); do $$p -v && $$p Makefile.PL && $(MAKE) test; done
clean ::
$(RM) t/CPAN/authors/id/A/AN/ANDK/*/Build \
t/CPAN/authors/id/A/AN/ANDK/*/Makefile.old
$(RM_RF) t/CPAN/authors/id/A/AN/ANDK/*/_build
no_CR : ChangeLog META.yml
$(PERL) bin/no_CR.pl MANIFEST
foreign-prefs : dd-prefs st-prefs
dd-prefs ::
`echo $(PERL) | sed -e 's/perl$$/slaymake/'` dd-prefs
st-prefs ::
};
if ($main::SVN_RELEASE) {
push @m, qq{
chlog :: chlog-trad
ChangeLog : ChangeLogTrad.svn
\$(CP) ChangeLogTrad.svn ChangeLog
};
} else {
push @m, qq{
chlog ::
};
}
for my $base (@main::ST_PREFS) {
push @m, qq{
st-prefs :: $base.st
};
if ($HAVE_YAML_SYCK) {
push @m, qq{$base.st : Makefile
\$(PERL) -MYAML::Syck=LoadFile -MStorable=nstore -e '\$\$x=shift; \@y=LoadFile("\$\$x.yml"); nstore(\\\@y, "\$\$x.st")' $base
};
}
}
join "", @m;
}
sub dist_ci {
return qq{ci :
svn ci
};
}
sub dist_test {
return q{
# if we depend on $(DISTVNAME).tar$(SUFFIX), then the rest of the
# Makefile breaks our intent to NOT remake dist
disttest :
rm -rf $(DISTVNAME)
tar xvzf $(DISTVNAME).tar$(SUFFIX)
cd $(DISTVNAME) && $(ABSPERLRUN) Makefile.PL
cd $(DISTVNAME) && $(MAKE) $(PASTHRU)
cd $(DISTVNAME) && $(MAKE) test $(PASTHRU)
distdir ::
touch $(DISTVNAME)/SIGNATURE && $(CP) $(DISTVNAME)/SIGNATURE ./SIGNATURE
$(CP) $(DISTVNAME)/META.yml ./META.yml
$(CP) $(DISTVNAME)/MANIFEST ./MANIFEST
}
}
sub distdir {
my $self = shift;
my $out = $self->SUPER::distdir;
$out =~ s/distdir :/distdir ::/g;
return $out;
}
# dist_dir was the name in very old MakeMaker as of 5.005_04
sub dist_dir {
my $self = shift;
my $out = $self->SUPER::dist_dir;
$out =~ s/distdir :/distdir ::/g;
return $out;
}